HOME - 

448 Entries - <<< Page 18 of 45 >>>

RANGER PRERUNNER

ID: 130053 Posted: Sept 19

FOR SALE
YEAR: 94
PRICE: $5,000

94 ford ranger. Has equal length beams, 9
inch rear end with spool and gears, short
course set up backhalf built by SMP, built
tremek tranny with short throw shifter. Has a
HO 5.0 with wiring harness all ready to go.
McNeil one piece front clip. Engine cage and
fabwork all done by SMP fab in the valley.
Tons of parts including everything to finish
backhalf. Pink in hand on non op. No time to
finish. First 5k takes it.

2002 F 250 7.3 CREW CAB 4X4

ID: 130051 Posted: Sept 19

FOR SALE
YEAR: 2002
PRICE: $23

The time has come to sell my pride and joy.
This is not a fire sale i know what i have
and know what its worth. These trucks are
very well sought after and this one has been
very well taken care of. Here is a list of
parts that the truck has had in the last
year. Only reason for sale is we got a new
truck.Full traction coilover conversion with
king 2.5s in black.Icon soft ride rear leafs
with king piggy backs.rear airbags with
remote.method holes 17x9 5 total.Toyo
mudterrain 37x13.50x17 maghytech trans and
rear diff covers.all frontend parts front end
completely rebuilt ball joints hubs rotors
steering joints and red head steering box
alternator and water pump 2008
tailgate,tailights,bumpers and leather seats
very loud srereo with bluetooth and back up
camera i know what i have and know what this
truck should sell for that said i would like
to see someone get a great truck. NO
TRADES!!! $22,500 show contact info jeff

3- 39 BAJA TA

ID: 130043 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $50

2 have 30 percent tread, hold air, good for
spares 50 bucks each 1 has 90 percent
tread, holds are but bead is chunked out from
dismount. Percent for mockup 50 bucks

PROCOMP XTREME MT2

ID: 130039 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $1,000

Tires where's mounted about 2000 miles ago.
Still have nipples on them. Set of 5. Great
tire, truck is under construction so tires
are no longer needed. 295/65R18

BFG BAJA KR 37X12.5R17

ID: 130038 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $2,500

5 - never used, mounted for mock up KR.
37X12.5R17

ULTRA 103X BEADLOCK 17X9 TOYOTA TUNDRA BOL...

ID: 130037 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $200

6 - Brand new only used for mockup. 2 are
still in the box and never opened. All
hardware and rings are included. I have black
rings or aluminum rings. Your choice. Price
is firm. PRICED PER
RIM 17x9 5x150mm 4.5" backspacing

RHINO SV1000

ID: 130033 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $8,000

Rhino SV1000 Rhino with SV1000 Weller
conversion. LSR longtravel,Elka shocks,
custom roll cage, PRP seats, 5 point
harnesses, blue Optima battery, HID
headlights and floods,Led shift
indicator,amp,2 sets of wheels and all
terrain tires, 1 set wheels and sand paddles.

FOX IBP COILOVERS 3.0 2.5 F&R,COMPLETE POL...

ID: 130030 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $1

All parts are from my 2016 XPT everything is
like new condition. A few of the suspension
parts have little bit of normal wear here and
there.Less then 200 babied miles on
everything here.Factory polars white powder
coat from turbo. FOX Internal bypass
Coilovers with full adjustments knobs 2.5"
for the front 3.0" for the rear. Awesome
shocks in new condition less then 200 miles
on them.$1900.00. 4 stocks length axles
(only two Pictured) $50.00 each 2 Front
upper control arm (w/ball joint i pressed
them out to give good cleaning and inspect
before selling I can press back in if need
be) $125 each 2 Lower control arm (w/ball
joint i pressed them out to give good
cleaning and inspect before selling I can
press back in if need be) $125 each 4 rear
radius rods $55.00 each rear suspension
plate $25.00 2 complete tierods 75.00
each 2 trailing arms $150.00 each

TIRE GROVER IN EXCELLENT CONDITION

ID: 130024 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $275

Van Alstine G-1000 with multiple heat
settings. works great.

39/13.50/17

ID: 130020 Posted: Sept 19

FOR SALE
YEAR:
PRICE: $500

BFG baja t/a two are groved two are not,
39/13.50/17 all hold air, no holes no
patches. Asking $500 OBO

<<< Page 18 of 45 >>>
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45